We've just launched our map. Add yourself by clicking here!
Shredder's SIEVE specifications
- This topic has 5 replies, 5 voices, and was last updated 2 years ago by
.
Hey all,
to those who have built the shredder, I have a question: What kind of perforated sheet have you used? Which one works best? You can buy all kinds with bigger or smaller holes, and it doesn’t say what to use, which one works best for you?
For v3 it would be interesting to make the sieve more easy to replace: not having it welded to the sieve plates, so that if you want to change for one with bigger holes you don’t need to weld plates again.
Ciao
It depends on how small you want your shredder plastic, I wouldn’t chose anything less than 6mm diameter to avoid clogging
It’s not only about the diameter of the holes but also about space between holes, this is often defined as % of “air”. My seive has 8mm holes but rather big spaces between holes. Which introduces accumulation of flakes on one side of the shredder.
Hey,thanks. Btw is shredder and agglomerator both required? And why is water add in the agglomerator? Wouldn’t the moisture affect the further process?
You must be logged in to reply to this topic.
