We've just launched our map. Add yourself by clicking here!

close

Topic Tag: Extrusion screw

Viewing 8 topics - 1 through 8 (of 8 total)
Yet another modification to the extrusion machine.   v3 upgrade screw. Using 2hp copper wound motor with belt and pulley/sprocket and chain speed reduction. 2 heat zones Upgraded the heaters to 2.25kw and the barrel is 1.75 inch bar stock, turned down to 40mm OD and the inside is a much tighter tolerance than the sloppy plumbing pipe.   We are about a maximum of 6.4kg per hour extrusion with this screw.  Next unit will use the Robot Digg 30mm OD screw.   https://www.youtube.com/watch?v=ENsiGDORtZI  
Viewing 8 topics - 1 through 8 (of 8 total)
Support our projects on Patreon so we can keep developing 💪