We've just launched our map. Add yourself by clicking here!

close

ADVICES ABOUT COMPRESSION MOLD

This topic contains 0 replies, has 1 voice, and was last updated by  Christian Henriod 1 week ago.

0
Christian Henriod chenkus

ADVICES ABOUT COMPRESSION MOLD

28/07/2020 at 18:30

Hello! Hope everybody is doing well.

 

I want to compress the planter which is in the attached drawings. Before quarantine, I got a big pizza oven and the idea is the build an external press machine, put the plastic flakes in the mold, melt them and then press it on the compression machine.

 

I need some advice about mold building:

– Which should be the thickness of the metal sheets to use?
– Should the mold need to be structured?
– Do the parts need to be CNC cut?
– and any further detail that could help me to make a good mold.

 

Thanks in advance!

Attachments:
0 replies
0 subscribers
0 saved
likes

You must be logged in to reply to this topic.

  • Folks that were just here

    Profile picture of Miguel Angel Alvarez
    Profile picture of Kanna
    Profile picture of Evan
    Profile picture of Franco David Barrionuevo
    Profile picture of Jayrald Misiera
    Profile picture of Christian Henriod
    Profile picture of Raghav Sharma
    Profile picture of PlasticHub
    Profile picture of Francis
    Profile picture of jeanmi
    Profile picture of Dylan
    Profile picture of CV Chăm Sóc Khách Hàng TV365com
    Profile picture of Healthy ung thu
    Profile picture of Safidy
    Profile picture of Real Recycling
    Profile picture of Tom van Beveren
    Profile picture of Sam Crisologo
    Profile picture of Jacob
  • Recent Replies

  • Support our projects on Patreon so we can keep developing 💪