Support our newest Precious Plastic campaign 🍌

We've just launched our map. Add yourself by clicking here!

close

Choosing motor for extruder

This topic contains 5 replies, has 3 voices, and was last updated by  Dimitri 1 month ago.

SEYN seyn-sustainableenergyyouthnetwork

Choosing motor for extruder

12/04/2017 at 10:11

Hi PP army.

we are now building an extruder and like many posts pointed out we are on the choosing motor saga…

We use a 26 auger drill and a precision cut pipe with 3 mm external diameter.

Since there is not big need for high torque we plan to go with a 0.5 HP single phase with a reducer going down to 35 RPM.

Any ideas/proposal/thumbs up or down?

Best,
ALx

helper
13/04/2017 at 07:07

Hey! I have been searching the forum for this, and concluded that you could use a smaller motor (then a 2kW), I will also use a 0.4-0.5kW motor for my extruder.

Toggle replies
starter
13/04/2017 at 08:56

Hey there ashrak,

cool. I will buy it today and will cost roughly 120-130 euros including the reducer…
Let’s stay in contact 🙂

Best,
ALx

Toggle replies
dedicated
17/01/2018 at 00:33

@seyn-sustainableenergyyouthnetwork
Hi
Any pictures of your réalisation?
Thanks in advance
DiB

Toggle replies
starter
17/01/2018 at 00:58

Hey there,

yes you can see some pics here if you want. We are also preparing some new projects so feel free to join us for updates.
https://www.facebook.com/pg/preciousplasticgr/photos/?tab=album&album_id=1281904811892892

Best,
Alex

Toggle replies
dedicated
17/01/2018 at 01:39

Thanks a lot
Love the Kalamata bicycle! 👍
DiB

Toggle replies
Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.