We've just launched our map. Add yourself by clicking here!

close

Extrusion Machine

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by  Michael 3 years ago.

0
Paolo paulmi

Extrusion Machine

18/01/2017 at 11:30

Hello everyone, I’m Paul, I need the following aid to build the machine for extrusion.
I wanted to know if this is correct size of the pipe?
1x Tube Ø34 x Ø28 L = 600mm
Then I wanted to know if this is correct screw size?
26mmx600mm
Finally I wanted to know what they’re called these bronze objects connected to the extrusion pipe, as per the attached photos.

Attachments:
3 replies
0 subscribers
0 saved
likes
sort on most likes

In reply to: Extrusion Machine

warrior
18/01/2017 at 15:53
0

yes those are correct dimensions.
these are called band heaters. their function as the name suggests is to heat the barrel. the color of the heater is irrelevant and varies from manufacturer to manufacturer.

In reply to: Extrusion Machine

starter
21/01/2017 at 16:04
0

Thanks

In reply to: Extrusion Machine

helper
25/03/2017 at 09:28
0

On the blueprint and the Bill of Material it says that the tube is 34 x 26 (not 28).

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Support our projects on Patreon so we can keep developing 💪