Fixed Knife small and Blade, spacer and the Other
I would like to know, If the rotating knives 5mm thick need to fit into a space with 5mm or 6mm? I suspect the version20 To be Mixed Up.
I am better in German…
Small fixed knife (6mm) then large fixed knife (5mm) and repeat.
Rotating knife (5mm) then spacer (6mm) and repeat.
So one 5mm rotating knife fits into a space with 6mm.
Thanks a lot. That makes IT 13 Times a knife and a spacer (11mm) plus 1 extra knife (5m). Equales 148mm
For the fixed Part i get 149mm
Ist this basicly true?
So i need to Work the fixed parts down to Match 148mm?
Yes, the fixed side will be 149mm (14 small knife and 13 large knives) and the rotating side will be 148mm (14 knives and 13 spacers), in theory.
In reality, the 5mm metal sheet that they cut the pieces from varies a bit, could be 4.8-5.2 or more/less, same thing with the 6mm sheet.
I just sanded my pieces quickly and made sure that the edges was clean and then I assembled the shredder without problems.
Thank You, I will start sanding.
Did you need to resharpen the blades?
You must be logged in to reply to this topic.