We've just launched our map. Add yourself by clicking here!

close

Injection Simplification – no screws, not threads

This topic contains 2 replies, has 3 voices, and was last updated by  Michael 2 months ago.

0
Kevin Dalferth wellsforzoe

Injection Simplification – no screws, not threads

03/08/2019 at 11:38

Hello

Inspired by people using a car jack I came up with this idea: Instead of bolting the mould-halves together and screwing it onto the injection nozzle simply use a parallelogram-based construction. Fix the left side onto a wall. To inject simply lift up the whole injector, insert the nozzle in the cavity of the mould then inject. The pressure on the lever should keep all in place.
Tell me what do you think about it?
Will be used at http://www.wellsforzoe.org for producing parts for village water pumps

Attachments:
2 replies
1 subscribers
0 saved
likes
sort on most likes
warrior
03/08/2019 at 18:25
0

Yes, once you get away from the screw on mold, there are several options for interfacing with the mold. I’m not sure you need the parallelogram. You only need a small motion to create an overlap with the mold. If you look at @andyn ‘s machine https://davehakkens.nl/community/forums/topic/benchtop-smaller-machines/ , he lets the cylinder float on a spring. In my machine, I went the other way and use a pair of shallow wedges to bring the mold up to a fixed nozzle.

Looks like you have a great project going.

starter
21/08/2019 at 16:34
2

This is our injection moulder , also no screws , just a nozzle that squirs into your mould , The table that the mould sits is height adjustable.

Attachments:
Viewing 2 replies - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Support our projects on Patreon so we can keep developing 💪