We've just launched our map. Add yourself by clicking here!

close

Looking for a machine builder?

This topic contains 171 replies, has 158 voices, and was last updated by  Yousef 1 year ago.

1
Dave Hakkens davehakkens

Looking for a machine builder?

23/03/2016 at 03:56

This topic is used to connect machine builders with people that want to have a set of machines but can’t build it themselves. Find and connect with each other!

Machinebuilders: lets us know your if you are interested and where you are from.
In need for a machine? Post a brief description of your plan and where you a from.

[EDIT] Since quite a few people want to connect here, it’s better to start your own new topic including the name of the city or country you want to start. This makes it easier for everyone to connect with others! Good luck 🙂
Hopefully you end up having a machine or end up having a job. – Dave

[EDIT 2] Many people continue to post request for machine builders or machine building services here instead of opening a new topic, searching the forum or looking at the bazar, so we are proceeding to close this topic for now. Many posts here end up buried and never looked again and we want to avoid that 🙂 – Olivier

171 replies
0 subscribers
0 saved
1 likes
sort on most likes
new
01/05/2017 at 06:42
2

Hi everyone 🙂

Looking for a builder for the following:

– shredding machine
– extrusion machine
– injection molding machine

in the UK, preferably close to Peterborough, but happy to travel.

Inbox me and we can have a chat.

Have been looking at this site for a long time and planning the process and now I’m ready to “pull the trigger” so want to get something sorted asap 🙂

Many thanks,

Alex.

starter
04/05/2017 at 05:25
1

Hi all,

I am Liew from Kota Kinabalu, Sabah, Malaysia.
I am looking for machine builder here.
Please assist.
Thank you.

Sincerely,
Liew

new
04/05/2017 at 19:04
1

Looking for a builder for the shredder and compressor. I live in Virginia, USA but am willing to pay for your time, costs, compensation and shipping. I am hoping for a compressor that can make blocks that are about 6X6 square and about 1.75-2 inches thick. I would use them to turn on the lathe to make shaving brush handles and pens. If it is ok, you can contact me directly peter @ wolfwhiskers.com.

Attachments:
starter
04/05/2017 at 23:28
1

MACHINE BUILDER FROM INDIA !!

Hello,
I am a machine builder from India who has already built these machines. Please let me know if I can be of any help to the community. Moreover, if anyone wants to purchase these machines directly, please give your contacts so that i can share the quotations.

My email id – [email protected]
My contact number – +91-9811174992

Regards
Dhruv

new
18/05/2017 at 17:55
1

Hallo dave, I’m asril from palu-indonesia. Since 5 years ago I was able to recycle plastic bottles into brooms or ropes. But I want to develop my interest in making more items for use to be such a society. That you make. But I am plagued with funds and knowledge to make machines like the machines you make. Hope you can help me make a free plastic recycling machine for me. Please help me. thanks.

new
19/05/2017 at 02:35
1

Hola, soy de Argentina y estoy buscando a alguien que pueda construir y venda las máquinas, ya sea en el país o bien que realice el envío de las mismas. Cualquier información será muy agradecida!

Dejo mi correo de contacto: [email protected]

Saludos.

new
26/05/2017 at 21:10
2

Hey I am looking for a Plastic Shredder to be built for the company I work for. I’m from Michigan but anywhere in the US would be fine.

new
28/05/2017 at 22:47
1

Hey Frank, nice to see you here. I’m from Beijing, if you still have interest in machine building, please let me know! I’d like to make a boost in Beijing.

helper
30/05/2017 at 01:14
1

Hi, we have made a shredder/ extruder machine in Coffs Harbour, NSW Australia. Starting last year in July our prototype is now complete and currently just testing the extruder and adding safety mechanisms.

We aim to sell units within Australia and the Pacific Ocean region, starting with 10 in the first year including a specialised training program with it- focusing on the chemistry of plastics and how to work with plastics.

If you are interested please check out my website http://www.thepacificcollective.com.au or email me (Louise) at [email protected].

Happy to discuss the problems and solutions we met along the way also.
The picture of the machine is still in raw prototype stage and will look alot nicer when painted and tidied up,

Cheers
Louise
(Env.Sc teacher/ marine biologist/ passionate marine debris person)

Attachments:
warrior
30/05/2017 at 22:13
2

This looks well cool, I’ve dreamed of this hack for quite some time now.. nice to see it in real life ♥️

new
16/06/2017 at 10:30
1

Hello,

I am trying to find someone who can build the machines called shredder, extrusion, and compression for my business purpose.

I’d prefer a builder who is residing in Korea, however the country doesn’t really matter as long as the shipping issue can be solved.

If anyone’s interested, please feel free to email me at [email protected]

Thank you!

starter
30/06/2017 at 01:14
1

Hello guys! I am Diogo from Lisbon, Portugal and I am developing a plastic recycling machine. By now I am building the shredder and to finish my task I need an extruder as well. However, it’s getting very complicated to find the needed materials for the extruder and then I am here asking if there is anyone able to sell me one. If you guys can do it or if you know someone who can, let me know, I will really appreciate it. Here you have my e-mail and phone number – feel free to ask me anything.
[email protected], +351 917 454 160

Kindest regards and good luck in recycling plastic, let’s move for a better world!

Diogo Oliveira

starter
15/08/2017 at 17:28
1

Hi,
Ridhwan here. I’m from Singapore. Looking for a machine builder to partner up with me as I only know basic machine handling. Would really appreciate if I could get a helping hand. Found a suitable place to start working. Let’s contribute to the society together!
p.s; Don’t worry, there will be some remuneration.
Hit me up – [email protected]

Sincerely,
Ridhwan.

starter
24/08/2017 at 22:51
3

Hello guys!

Im a student and maker from Stavanger,Norway looking for someone that could build the injection moulder for our makerspace. Please mail me at: [email protected] if you can do it! Thanks in advance.

new
02/09/2017 at 23:29
1

Hi plastic worriors,

Im looking for someone in Oman or UAE to help build the machines or to start with the shredders.
We want to contribute to recycling all over the world.

Please inbox me on [email protected]

Thank you
Hatim

starter
18/09/2017 at 15:34
1

Dear group, I´m looking for a machine builder in Spain.
Do you know someone in Spain who sells the machines ?

new
22/10/2017 at 03:54
1

Hello. Definitely interested in building a machine in Mexico. In the Riviera Maya. Please contact me if you can. Paul Sanchez Navarro.

new
04/11/2017 at 14:46
0

Hello and Goof Morning to Everyone,

I’m looking for a Machine Builder in the USA, I live in Westerly RI and am looking for a shredder and extruder.
If someone could get back to me, my email is: [email protected]

Thank you for your time.

-Pete

new
21/11/2017 at 13:32
1

Hello from Portugal,
Im looking for someone in Portugal to help building the machines.
We want to contribute to recycling all over the world.
Thank you
Miguel
[email protected]

starter
05/12/2017 at 03:54
0

Hi everyone. Mi name is Rafael and I’m from Asuncion, Paraguay. I’m looking for a machine builder that sells, preferably in Latin America. Hope to have a reply!

Hola mi nombre es Rafael, soy de Asuncion, Paraguay. Estoy buscando algun proveedor o fabricador de estas maquinas que me de una mano y me indique donde puedo comprarlas o adquirir las piezas para su posterior ensamblado! espero alguna ayuda, gracias!

Email: [email protected]

new
09/12/2017 at 10:35
0

Hello Folks,

I am Nikunj from Pune, India. We have been into the business of manufacturing extrusion machine for commercial production for the last 50 years but we would be really happy to involved ourselves into something at a much larger level to help the community.

We can also make the shredders.

Please let me know how we can work together in making a difference.

Looking forward for your responses.

Connect me : [email protected]
Mob No. : +919830569698

warrior
09/12/2017 at 11:05
2

@nikunjbhaia do you think you would be able to help in getting this screw made?

Attachments:
new
09/12/2017 at 11:17
0

Lets discuss, i will speak to my design team and we can get it done.
Call me when you are free to talk

starter
16/12/2017 at 15:52
0

Hello, I am living in Penang Malaysia and am nearly finished building my machines a shredder, injection and extrusion machines. If you are interested you can let me know and maybe we can work out a price.

helper
20/12/2017 at 19:20
2

@r2imagineen esto te puedo ayudar yo, de momento estoy muy concentrado en la destructora, el precio final es de 375€ sin “patas” y sin el motor, de que parte de españa eres?

starter
21/12/2017 at 10:49
1

Gracias, soy de Guadalajara.

starter
28/12/2017 at 16:36
1

Hi im from Nigeria And im looking for a machine builder, i’m really interested in starting this recycling project but i have absolutely no idea how to build a machine!

new
08/01/2018 at 16:29
0

|Hello Victor,
Hope everything is fine, I am also exploring the recycle project in Nigeria. Hopefully we can connect and work towards the project.
BR
|Ofien

starter
10/01/2018 at 17:05
0

Hi all
I am based outside of East London in South Frica and am very keen to get started. Is there anyone anywhere in Africa who supplies or could build me a machine?
I’m really hoping I get a response.
Cheers
Mark

dedicated
12/01/2018 at 12:04
0

Try @mattia he might have some contacts in Africa

Viewing 30 replies - 121 through 150 (of 171 total)

The topic ‘Looking for a machine builder?’ is closed to new replies.