Hello from Greece!
After healing of my broken hand finally i finished the shredder and the injection machine!
Here is my creations 🙂
1.is well known 🙂 (alum mold,need lathe)
2.windsurf valve (alum mold)
3.key ring of a board company (alum mold-cnc)
4.key ring of my surf center logo(epoxy mold)
5.phone stand (alu mold 3pieces)
*More photos from my injection coming soon
**Questions about the molds are more than welcome!
@sharma-sagar i tried many times my epoxy mold.. it was not bad!(for sure you can not compare with aluminium mold! )
If you like to copy something or to make not really expsensive mold my opinion is worth to try it!
i made a really really really stupid mistake about the main hole of the mold! except that, the textures was good as you can check at the picture bellow!
i will use the epoxy mold more times! and if i see that it works good maybe will prepare a tutorial!Toggle replies
I tried many many times the epoxy mold and the result was not good at the end.. For me the only solution is the aluminium molds..
I use the whirling mold also like door handle(check pics)the hpde plastic is strong you don’t need any nut on it..
Just a hole at the right diameter and its ready to use!
to make the mold without the cnc i took 3 pieces of aluminium
At the first i went to engrave the graphics at a jewelry shop (took about 10€)
after that i took another one 3mm and i made holes via drill and than i used the rasp to make my design
after that i took the third i made them sandwitch i made a drills to make it like a mould!
please check the pictures
i hope that i help!Toggle replies
You must be logged in to reply to this topic.