We've just launched our map. Add yourself by clicking here!

close

NEED HELP

This topic contains 11 replies, has 6 voices, and was last updated by  mariela rangelova petrova 2 weeks ago.

0
Игорь schwarc2018

NEED HELP

20/05/2018 at 00:00

hi I want to make a shredder according to the drawing which is on the website but this drawing is not enough in all sizes. who can help? I need the exact dimensions of every detail.

Attachments:
11 replies
3 subscribers
0 saved
likes
sort on most likes

In reply to: NEED HELP

helper
20/05/2018 at 16:22
4

First thing, take the files from the shredder in the UPGRADE-Folder. This overview is from the 2.0-Version and as you can see, the quantitys are not correct.
Then, if you need exact dimensions, you can open every cad-file in a cad programm and measure what you want to.

In reply to: NEED HELP

starter
30/05/2018 at 08:59
1

Hello @sonik. I open cad file in Autocad 2017. Program show message Cad file making in another program. Some data may be not correct. And if I check size in cad file and in blueprint they are different.

And one more thing. Where is download upgrade version shredder?

In reply to: NEED HELP

helper
30/05/2018 at 20:55
1

Hello, i can open the files in freecad, because i dont have autocad. So i assume that the files are okay. The Upgrades Folder is in /precious-plastic-kit-master/Build.

In reply to: NEED HELP

starter
31/05/2018 at 11:47
1

Hello. Okay thank you. Need test freecad.

@sonik Do you builded shredder?

In reply to: NEED HELP

helper
31/05/2018 at 20:28
1

Not yet, but probably soon, like in one or two months

In reply to: NEED HELP

warrior
03/06/2018 at 01:04
1

@schwarc2018 did you manage to find the files you needed?

In reply to: NEED HELP

starter
19/06/2018 at 16:13
1

I need too. (exact dimensions)

 

In reply to: NEED HELP

warrior
19/06/2018 at 18:09
2

@mayraghionbr
I cannot provide dimentions for every individual file, but if it helps, this is the amount of steel you need of each type:

1/8″ or 3mm = 250 x 700mm sheet of metal
3/16″ or 5mm = 500 x 600mm sheet of metal (attached picture shows 700mm but 600mm is enough)
1/4″ or 6mm = 480 x 500mm sheet of metal

Here’s a picture to show you how to arrange the parts

Attachments:

In reply to: NEED HELP

starter
30/10/2018 at 20:51
1

Hola has podido descargar los archivos ? Me puedes ayudar

In reply to: NEED HELP

warrior
30/10/2018 at 20:59
0

@marirobidani https://preciousplastic.com/en/videos/download.html

In reply to: NEED HELP

starter
30/10/2018 at 22:50
0

gracias pero lo descargo y una vez que quiero abrirlo no hay nada .

Viewing 11 replies - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.