We've just launched our map. Add yourself by clicking here!

close

Compression molding – moldmaking

This topic contains 11 replies, has 7 voices, and was last updated by  Christian Henriod 3 days ago.

2
Dave Hakkens davehakkens

Compression molding – moldmaking

22/12/2015 at 23:42

Working on a mold for the compression molding machine. There are many ways and materials to create molds from. Personally i like to work with metal and welding simply because those are the tools we have available. i’m trying to make sort of a fruit bowl. Made of a mold and a counter-mold, they are heated and pressed together with shredded plastic inbetween. After a while its baked. Might sound a bit abstract but got it clear in my head, let’s make.

Attachments:
11 replies
2 subscribers
1 saved
2 likes
sort on most likes
warrior
24/12/2015 at 00:51
0

Welded everything together, added some reinforcement and finally some guiders to make sure the mold goes straight down when its pressed. Ready for a testrun!

Attachments:
warrior
27/12/2015 at 02:07
1

This is what it looked like before and after heating the mold in the oven. Turns out i’ve added a bit to much plastic in the mold. So it leaked after pressing/heating. Shouldn’t be a big problem to finish up properly and for next time, less plastic..

Attachments:
warrior
30/12/2015 at 17:16
1

Method seems to work! Still a bit rough, but overall it’s pretty solid and robust. It wasn’t fully molten all the way around, probably because the oven doesn’t get hot enough at the bottom. Next time we will place it a little bit of the bottom.

Attachments:
new
18/01/2016 at 16:19
1

Hey Dave,
What kind of oven are you using? do you think it would aslo be possible with a regular oven used for cooking food? Great work, i’m very interested.
Paul

warrior
18/01/2016 at 18:42
0

This machine is build from a normal household oven. However we did customize it by adding a better temperature controller which is more accurate. Wouldn’t recommend to use the oven you are cooking in though, get another one from the scrapyard for a couple of bucks to experiment with.

starter
01/06/2016 at 05:02
0

You use an electrical oven rigth? what happen if i use an gas oven?

sorry my english, i dont know a much

warrior
02/07/2016 at 16:10
0

You use an electrical oven rigth? what happen if i use an gas oven?

Same thing. But difficult to control the temperature of a gas oven

starter
13/07/2016 at 08:20
0

how do we do this without a welder?

warrior
03/09/2016 at 09:53
0

@jsk555 you might work something out with concrete or wood, but the resulting mold will probably not be as sturdy as a welded metal mold.

warrior
03/09/2016 at 17:42
1

@xxxolivierxxx @davehakkens what kind of mold to use, what to make, and dimensions of a mold is vast and interesting topic all together as most of us don’t know what else useful things one can make using these machines.

anyone using a mold should post pictures and drawings of their mold to help everyone else or more accurately lessen the load on imagination😂😂😂

starter
16/05/2019 at 17:40
0

Hello @davehakkens, how are you?
Hope you can help me with this, you seem a busy guy.

Just wanted to know the thickness of the metal sheets you used for the mold. Thanks!

Viewing 11 replies - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.