Forum Replies Created

Viewing 24 replies - 91 through 114 (of 114 total)
sort on most likes

In reply to: Spam / Scam Bots

dedicated
10/02/2018 at 17:37
1

BE AWARE FROM THIS USER, PLEASE BAN FROM THE FORUM

dedicated
10/02/2018 at 01:36
0

@lukeryberg25 YOU MUST ASK FOR 110V MOTOR and I think monophase motor work better, I have to try if 750w motor it’s enoough or we need 1100w, you can also choose the RPM and if you need a mecanical variablke rpm. By the way I have no buy the motor yet, so in case you will, please tell me so we could get some discount (maybe).
This is the link http://www.elmarelettromeccanica.it/it/181-monofase?p=2

dedicated
07/02/2018 at 01:53
1

In reply to: Shredder 2.1

dedicated
06/02/2018 at 18:43
1

MOTOR WITH SAFETY STOP

Attachments:

In reply to: Shredder 2.1

dedicated
06/02/2018 at 18:42
1

AAA Hi All, I will start to built my shredder in May and I am looking a solutions to make the shredder cheaper and easier to built, The solution I fiond are:
1 aluminium frame without welding
2 Hex axel with round end 25mm for bearing UCFL205 and final 24 mm with keyway to go directly inside motor, no coupling needed.
3 Monophase motor with 750w / 1 Kw max with electronic, double directions, safety stop and variable speed included, double output for shredder and extruder (I found it)
4 Shredder without weld fix end profile (you didi it on upgrade files)
So I would like if anyone can hel me, I need Cad file for the side plate of shredder and round spacers, the side olate must have new bearing holes, now they are for UCFL 204 90mm center to center, I need 99mm, then the 2 spacer has the inside diameter of 20 and I need 25 mm. i am not sure is there are more modification to do.
I’m quite sure it is possible to built a shredder for 800€ with new motor or buy it from a builder for 1200 / 1300, consider that you will use the same motor for extruder so it will be very cheap.
Please feel free to contact me, actually I am in Lima (Perú) but I will be in Italy from The end of March.

dedicated
06/02/2018 at 16:39
0

Hi Katharina, I have a few question… I saw in the photo that the shredder is the old version, are you going to make the new version with modify file an modify sieve parts?
Is Possible to have the whole shredder by normal steel to make it cheaper?
By the way I’m Interested in Buy 2 sets with delivery in Italy, thank you in advance.

In reply to: machine in mexico?

dedicated
05/02/2018 at 08:47
0

Puede. Comunicarte con precious plastic
México, ellos. Fabrican y vendenaa maquinas, saludos.

dedicated
05/02/2018 at 05:22
2

I was looking the photos and It seems the belt wheel are not appropriate, the V belt work well if all the sides are 8nside the pulley, i think you can use car vehicles belt wheel to be sure the small whells works well, for the big one you would not have problems. Hope I could help, bye.

dedicated
05/02/2018 at 05:10
2

A flywheel have sense only with high rpm, so if you put it on the shredder shaft it will no work, he need cynetic energy to help the shredder doesn’t stop. In add this isn’t your problem, as you say, the very belt doesn’t work well, they slip, it means the motor have more torque than the belts can manage, you must, try to tight more the belt or change with a teeth belt and wheels.
Take a car belt tensor to be sure the belt works well.

dedicated
03/02/2018 at 23:15
0

You can take a look at plastic wood, usually is 50/50 plastic /wood, sometimes 60/40 but it need add other chemical product, by the way it will be recyclable.
Maderplast, el bosque plastico etc. etc. there are a lot of company doing nstuff with this material.

dedicated
01/02/2018 at 16:47
1

He contact me about 1 month ago, I didn’t read the other posts, thank you.

dedicated
01/02/2018 at 01:46
1

Very interesting, lease send the address to see and share the crowfunding.

dedicated
31/01/2018 at 19:15
17

I contact Muzzi Cycles ( http://www.muzzicycles.com.br/muzzicycles-English/ ) it’s a brasilian company that made bike frame from recycled plastic, the say it’s possible to speak about make bicycle in europe and I thing that you (Dave) could speak with them, This could be a very big step for who want to do something bigger. I hope it could help…[email protected]

dedicated
31/01/2018 at 02:40
0

https://www.facebook.com/speedybrick/ brick
patented all over the world!

dedicated
31/01/2018 at 01:41
18

Hi, I’m thinking in making cheaper shredder for sale with a foldable framework so the shipping cost will be lower, in add the motor gear reduction could be buy with double axis exit, so it will be possible use the same motor for shredder and extrusion, without chains or belt, in add it will be possible to make plastic balance bikes for kids just using a plastic board (with CNC router work) or disrectly with apposite molds.In 2 months I will return in Italy and start to work on it.

dedicated
26/01/2018 at 02:46
0

You can use butan gasto mold the plastic with a temperature control (arduino?)

In reply to: Hello frome Rome Italy

dedicated
24/01/2018 at 18:22
0

Thanks a lot, I HAVE CONTACTED THE Kids Museum… let’s see.

In reply to: Hello frome Rome Italy

dedicated
24/01/2018 at 18:21
0

Ciao Simone, nel bazar ci sono molti pezzi da poter compre¡are peró quasi tutti del trituratore, devi andare sulla mappa e selezionare tutti i costruttori di macchine e vedere i prezzi e se le inviano intere. Io ho chiesto a Roma e sto aspettando una risposta.

dedicated
24/01/2018 at 00:39
0

Hi, I am in contact with speedy brick, it’s possible to make a brick like Lego r a different brick with just flat plastic board, they have a patented lock to build anti earthquake house, I have the exclusive for Perú but I will comeback in Italy in March, just let me know if could be interesting. There is another company, a. Mix between byfusion a day the shelter of precious plastic,but they use concrete debris, is. Holland based, they are actually working in Haiti,. The name is the mobile. Factory. Like you I look for all this project and hope one day be part of one of. This. Bye

dedicated
24/01/2018 at 00:30
0

Ciao ragazzi mi chiamo Fabrizio e a Marzo tornerò in Italia più precisamente a Roma, mi piacerebbe poter iniziare questa avventura e vorrei sapere se qualcuno di voi si occupa di carpenteria digitale o vero uso di router CNC PER FABBRICARE per esempio piccoli mobili ad incastro o nel caso specifico biciclette per bambini con telaio in plastica… Aspetto notizie, ciao.

dedicated
24/01/2018 at 00:08
0

Precious plastic México te puede ayudar.

dedicated
23/01/2018 at 16:20
2

Hi, I would like to partecipate, unfortunately I have low resource and I have to figure it out how to do it. I have a lot af tools to help build machine and technical skills, in add I have a lot of ideas abouit what to do with recycled plastic that can give us the money we need and add other social project regarding enviroments, if you want we can speack about it. Currently I’m living in Perú but in March I will come back to Italy.

dedicated
23/01/2018 at 16:05
0

Hi, I would like to participate, I am Italian, currently live in Perú but in March I will come back to live in Rome. I can’t weld but I’m very good with tools and I can bring a lot of tools to help building everything. Waiting for news…

In reply to: Homes in Plastic

dedicated
23/01/2018 at 05:23
0

Hi, I’m working on this with a brick like Lego, at the moment I’m waiting for the patent rights, actually the brick is built with wood or plywood but plastic is a great option for country with hi plastic pollution.

Viewing 24 replies - 91 through 114 (of 114 total)