Forum Replies Created
this is really nice…
Project name: precious plastic Bandung
Location: Bandung – Indonesia
Topic URL: https://davehakkens.nl/community/forums/topic/shredder-kit-laser-cut-hexa-indonesia/
1st batch – Laser cut Shredder Kit is full and closed.
Now were open for 2nd batch, Indonesia area only.
Price is €340 ~ Rp 5.1M
the package is :
A. 72pcs laser cutted parts. 6;5;3mm as listed in blueprints.
price : Rp 4.9M ~ €327.
supplied as laser cutted only
B. 1pc 32cm length hexagonal M28,5mm
price : Rp 200.000,- ~ €13.
supplied as hexa bar
*Extra treatment for community member
1.Machinized hexa bar as Build/Shredder/Blueprint/03_Shredder Axle(shaft)
2.Machinized 6mm 2x Side parts for M10 Countersink Screw
3.4pcs SUS304 M10 Countersink screw
– need 13 ppl to get this price.
– 1-2 weeks process after we complete the list. hope we can start in March
– not including shipping.
– material is SS 304, finish 2B for plate.
– not including other machine parts such as L angle profile, mesh, hopper, bearing, and screw.
– not include Electronics.
*We also can build the machine, please contact via [email protected] for more info
maybe you should try with compression machine to make item with 100gr< item
check for “band heater” and “PID controller”.
on shredder’s bill of material its called L angle profile. maybe you can check on local metal shop
@rizla and dont forget, the cooling rate will be very fast for thin wall. melted plastic might turn solid.
on picture is my first attempt, the plan is vase with 2,5mm wall. result varying thickness from 2,5-5mm, the thin wall mold might deform due to heat+pressure.
you might want to use thick mold and put extra heater around it.
*my mold capacity is around 75gr HDPE.
injection machine ready to test
Anyone can help with injection machine wiring? When i put 2 PID circuit, the temperature going up more than i set. The heater seems to always on even the relay light is off
update on preorder list :
1. @ramdhan2805 – Bandung
2. Yonan – Bandung
3. Dadan – Bandung
4. Asrul – Banda Aceh
5. Danone – Jakarta
6. @kumiscacing Hanif – Jambi
7. @yudiandra – PP Indonesia
8. @machrus – Bandung
9. @yugo – Bandung
10. Sonny – Bandung
3 more people to go. yeay!
please spread the news
@rom-gefen for now, we only manage to provide parts for Indonesia area. i hope you find laser cutted part near your location.
after shredded into flakes, plastic then enter extrution machine become string form, then u can chop it into small pellets
layout shredder 13 unit this the layout plan for our project in Indonesia. distance between parts is 10mm maybe to avoid bending from heat generated.
as for tolerance, smaller is better. but you might want to consider hexa hole dimension in knifes and knife spacer to adjust with your hexagonal bar you got.
Hi Azis, on shredder machine will be depend on what output flake size you want. with 5mm hole mesh i say roughly around 10kg/hour on PP. without mesh = bigger capacity.
@dannyg hi Danny,
we working on Precious Plastic shredder V2.0. 6,5 and 3mm plate. and also when we use laser cut in indonesia, we can easily monitor the production. while minimize shipping cost & delivery cost.
the reason why need 13 ppl is this layout attached. it will use almost whole 4×8′ plate.
great idea @michaeldjoko , and thanks for sharing
The new mashine for wool from Recycling PET
PET bottles Recycling cheap and easy technology, fiber from pet bottles