stamatios promponas
Forum Replies Created
Helloeverybody!
Long time to write!
Here is my latest creation from 0
IPhone X mould!!
Took me around:
-22hours of designing
-310€ of aluminum stock
-couple Cnc bits
-6 different mould tries
Hello evreybody!
I have make a few modifications to the mould!
Now the injection hole is at oposite side that means the case is clean and the injection sign is inside the case
hello!
I have made a year a go this video
https://www.youtube.com/watch?v=e1JgAjRi4Bw hope you like it
the only way at moulding is the aluminium..
all the rest working just for few times:(
Hello!
Very interesting idea!
it will be great to combine extruder and injection to avoid! the manual refill !
Hello!! Thanks for sharing!
I have try similar mould with Pp plastic! I found the result too soft..
We need to find more hard plastic!
looking forward for your fiber glass try!
Hello @csejal
according to my tests doesn’t matter the thickness of the mould at compression machine because all the mould reach high temperature..
only at injection machine you need specific thickness cause the mould is cold
the thickness depent from:
-the size of the mould
-from the type of plastic
-the force of the injection
*maybe this question is not for this topic
Hello
Back to recycling after the summer season!
i made this mold for a sport school in Australia!
i call it sandwich mold
1 mold 3 different patterns !
Looking forward for your opinion!
Stam
https://www.youtube.com/watch?v=e1JgAjRi4Bw
video for my windsurf school showing the process of creating surf key rings for my customers..
plz check the way of using the injection..
looking forward for you comments if there are more quick ways!
best regards
@manuelmaeder Try to use another type of pp , try also lpde and i believe for cases is the best!
@jradcoolness that technic would be perfect to keep the mold closed without any screw!
to avoid the licking of plastic when the mold is away use if you like a water tap!
i had the same problem at the mould!! i put the one part back to the cnc and i milled that perimetrical line !after that used the mould just with the screws! i thought that was my mistake when i exported the cam thats why i didn’t mention it!
Cool lamp!!!if you can break the plastic easily means the temperature is high, i have little experience about the ABS i tried one time only but the result was the same or similar color as before (i have note the temperature i will let you know)
what is the HeyyyyyyyyJohe in the photo? place to melt aluminium?
Hello!I tried days ago the lpde (4) for my first time! i found it perfect for the case ! soft goes everywhere with not so much pressure like pp
Hello!
I manage to finish the phone case mold!
As you can see on the pictures below the result is not 100% professional like Jerzeek cases but for me to mill such a complex mould with 3axis cnc it was challenge!
Once more i would like to thank again @jerzeek who share the files for free!
hello!
the idea was to give it as valentine gift to my wife:D
its about 5cm x 4cm
Hello!
my latest creation
looking forward for your opinion and probably for your ideas!